HeaterSim

Fired Heater Simulation & Modelling

Fired Heater Designs                                                                          Get you free trial >>

Fired Heater Companies  |  EPC Companies  |  Operator Companies 

Cost Estimate    |    Datasheets & Drawing    |    FEED Wizard    |    Stack and Refractory Calculation    |    Fired Heater Designs

API 560 Arbour Coil Fired Heater
API 560 Helical Coil Fired Heater
API 560 Cabin Fired Heater with Horizontal Radiant Tubes
API 560 Twin Cell Double Fired Box Heater
API 560 Twin Cell Cabin FiredHeater


Heater560 is suitable for all API 560 fired heater configurations, including Vertical Cylindrical, Cabin and Box heaters.


Fired Heater Configuration Summary:


 - Vertical Cylindrical Heater (vertical serpentine coils)

- Cabin Heater, Flat Roof (Horizontal Tubes)

- Cabin Heater, Inclined Roof (Horizontal Tubes)

- Box Heater (vertical serpentine coils)

- Vertical Cylindrical Heater (Helical coils)

- Multi-cell Arbour Coil Heater (bottom manifolds)

- Multi-cell Arbour Coil Heater (top manifolds)

- Twin Vertical Cylindrical Heater (vertical serpentine coils)

- Multi-cell Cabin Heater, Flat Roof (Horizontal Tubes)

- Multi-cell Cabin Heater, Inclined Roof (Horizontal Tubes) 

- Multi-cell Box Heater (vertical serpentine coils)

- Twin Vertical Cylindrical Heater (Helical coils)

 

All cabin and box heaters can be specified as Single or Double Fired


Different size tubes can be specified within the radiant and convection sections. The firing conditions such as excess air percentage, air temperature and percentage heat loss can also be specified.


The number and location of the burners can also be specified or alternatively, the software can automatically calculate an optimal number of burners and burner layout for a new fired heater design.


 

‘Built-In’ Process Fluids

Heater560 has a number of common ‘built-in’ process fluids for your convenience, including:


- Therminol XP

- Therminol 66

- Therminol 55

- Water

- Crude Oil (Typical)

- Regeneration Gas (Typical)

 

 

Built-In’ Tube Materials

Heater560 has all the standard Tube materials

for your convenience, including:

  - Carbon Steel

- 1.25 Cr / 0.5 Mo - P11

- 2.25 Cr / 0.5 Mo - P22

- 5.0 Cr / 0.5 Mo - P5

- 9.0 Cr / 1.0 Mo - P9

- 18 Cr / 8Ni - 304SS

- 316 SS

- 310 SS

- 18 Cr / 10 Ni / Ti - 321 SS

- 18 Cr / 10 Ni / Nb - 347

- 18 Cr / 10 Ni / Nb - 347H



 

 

                                                   Start you free trial today

 

 


 

Heater560 Fired Heater Software screenshot
Heater560 Fired Heater Software screenshot
Image description
Image description
Image description
Image description